The following components are additionally required for the software:

• 1x 603.12.032.000 Receiver
• 2x 603.12.033.000 Pressure sensor

• Optimum braking and accelerating, even in bends
• Reduced risk within the laws of physics
• Improved riding stability in all riding situations as well as braking effectiveness
• Reduces the motorcycle’s tendency to return to an upright position when braking heavily in curves
• Reduces the risk of “lowsiders” (accidents in which the motorcycle capsizes during cornering and the wheels slide out toward the outside of the bend)

Greater safety and convenience with the automatic indicator reset, making forgotten indicators after turning or overtaking a thing of the past.

• Automatic reset after 10 s and a distance travelled of 150 m
• The counter is halted while the vehicle is at a standstill

• Leaving the ABS functions activated is recommend on public roads!
• Your dealer will have the detailed functional overview for your machine ready for you.

• Prevents the motorcycle from rolling backwards unintentionally
• The system determines whether the motorcycle is on a slope and at a standstill
• Brakes continue to be applied automatically until you actually start riding

• The motor slip regulation (MSR) works counter to the motorcycle traction control (MTC)
• If the motor slip regulation is too high due to rapid downshifting or abrupt throttle reduction, the Ride-by-Wire system opens the throttle valve exactly enough to prevent the rear wheel from drifting away
• Thanks to MSC support, this system also works depending on the cornering angle

• The control range of the ABS is somewhat later than on asphalt
• The control of the front brake allows for a longer delay without adversely affecting stability
• The rear wheel can dig itself better into the ground, which improves braking performance in off-road conditions
• Maximum safety on off-road terrain

• Quickshifter+
• Motor slip regulation (MSR)
• Hill Hold Control (HHC)

• 613.12.953.044 Dongle

• ABS mode "Supermoto":
  • The ABS function is only active on the front wheel (single-channel ABS). The rear wheel can lock at any time without ABS controlling the braking procedure.
• ABS mode "Off":
  • The ABS function is switched off; it remains deactivated even after switching the ignition back on. The front and rear wheels can lock at any time without ABS controlling the braking procedure.

Leaving the ABS functions activated is recommend on public roads!

• Traction control spin adjuster (9-stage)
• Adjustment of the throttle response
• "Track" ride mode
• Anti-wheelie mode off
• Launch control

• Additional "Performance" mode
• The "Track" mode offers only the functions which are needed for riding on the race track
• The "Performance" mode offers additionally to the functions which get enabled through the TRACK PACK

The following functions are available once this has been activated by your authorized KTM dealer:

• QUICKSHIFTER+
• KTM MY RIDE
• Motor Slip Regulation (MSR)